Delphin bilge pump exit

Places, technique, kayaks, safety, the sea...
Post Reply
Posts: 40
Joined: Wed Oct 05, 2016 2:02 pm
Has thanked: 19 times
Been thanked: 7 times

Delphin bilge pump exit

Post by blueythe »

I know this topic is the subject of a number of threads that have provided some really useful info. Fitting an electric bilge pump to my delphin is on my list of things to do. From the previous posts I am pretty sure what gear I will be using but I am struggling as to the best position for the exit hole on a delphin corelite x mainly due to the corrugation behind the cockpit. Any advice with photos please would be greatly appreciated

Posts: 529
Joined: Thu May 11, 2006 5:01 pm
Location: Scotland
Has thanked: 3 times
Been thanked: 11 times

Re: Delphin bilge pump exit

Post by Daker »

I haven't got around to doing mine yet but intend sticking it exactly where those ridges are.

Either cut the hole, insert the outlet and fill the valleys between the ridges with your goo of choice (Sikaflex / Silicone or similar).

Or, mark the size of the outlet outer diameter, cut / grind away the ridges with a chisel or Dremel device, fit flush to the deck.
Im fairly sure I will be using this approach.

Post Reply