Here is my 2014 Mega Edge Xtech (top spec at the time ) which has seen far too little use. It has some provenance of being the penultimate boat to be made in the Bude factory before Mega changed ownership and relocated. It’s had no repairs and has only a couple of light scratches from paddle shaft near the cockpit and the hull from beach launching. Had 3 loops built in for thigh straps, and I retro fitted an immersion research adjustable backrest (£120) and also made a foam 'suicide' block that fits around the legs to pin you in, not to be used without experience!
Also has 2 air bags, and a padded Canyon Gear bag that fits the boat nicely. A lightly used set of fins with it and also another 4 sets of fins in the kit box (another £200+!)
Also the original back rest plus 2 bags of outfitting and foam pads . There is a Jackson happy feet in the box and 4 dry/semi dry cag-decks that might fit/work (need a wash and most have small splits in the neoprene from paddle rubbing)
Cost you over 2K to buy a new boat and bag without all the extra fins and backrest.
This is a current design and a brilliant boat and hardly used. Check out the reviews!
Located in Holsworthy, just south of Bude in North Cornwall.
I’d rather see someone enjoying it than it hiding in my garage.
Grab a bargain :-)
Call / Whatsapp 07887506597
Mega Edge Xtech + accessories.
-
- Posts: 173
- Joined: Sat Feb 14, 2009 7:02 pm
Re: Mega Edge Xtech + accessories.
Well annoyingly I dont seem to have worked out how to work a computer, nor add photos!
Boat is on FB marketplace and Ebay - Just search Mega Edge and you will see the silver and yellow boat with the price and all the photos :-)
Boat is on FB marketplace and Ebay - Just search Mega Edge and you will see the silver and yellow boat with the price and all the photos :-)
-
- Posts: 173
- Joined: Sat Feb 14, 2009 7:02 pm
-
- Posts: 4681
- Joined: Sun Aug 22, 2004 11:33 pm
- Location: NW England
- Has thanked: 181 times
- Been thanked: 468 times
Re: Mega Edge Xtech + accessories.
To add photos, go to Full Editor & Preview, then the Upload Image tab at bottom left