5 posts • Page 1 of 1
Easy enough to DIY, all you need are the parts. What make of paddle? This might make it a bit harder if it's a Werner as they are a bit wider internally than most, though I have managed to put Lendal Padlock on Werners, still going strong after nearly 10 years.
- Posts: 8093
- Joined: Tue Apr 29, 2003 9:44 pm
- Location: Scotland
- Has thanked: 11 times
- Been thanked: 18 times
There is an excellent photo-article on making a set of splits on unsponsored's blog http://www.unsponsored.co.uk/press/?p=5998 - if you do this, I'd suggest making the cut off-centre so that when the spigot is fitted, the two halves are the same length. A mitre saw will produce a clean, square cut. Lendal will supply spigots for their paddles, and 26/27/28 mm spigots and sprung buttons can be got from Whitewater or Up and Under.