Hydro on the Barle

Whitewater and touring

Hydro on the Barle

Postby storm » Sat Jun 02, 2012 11:50 pm

Apparantly a hydro has been approved for Barle below Dulverton?not going to be great for the paddleing or fishing anyone know anything seems to have gone under or radar fishing groups are not happy dont think there has been any consultation with paddlers?Will try and find out some info.
Steve
storm
 
Posts: 311
Joined: Thu Jan 05, 2006 12:53 am
Location: CROYDE BAY N DEVON

Re: Hydro on the Barle

Postby chriscw » Sat Jun 02, 2012 11:54 pm

Is it going to use the existing Dam/weir? If so it might not have much effect.
Chris Clarke-Williams
Location Basingstoke

Paddling Interests:
Touring, Coaching Beginners (I am an L2K), Surf White water trips, Weir Play (I'm not good enough to put freestyle!)
chriscw
 
Posts: 746
Joined: Thu Oct 12, 2006 11:35 am
Location: Basingstoke

Re: Hydro on the Barle

Postby jmmoxon » Sun Jun 03, 2012 6:21 am

It is the stepped weir:
http://www.westernrenew.co.uk/wre/news

Fishermen obviously knew about it in March:
http://www.somersetcountygazette.co.uk/ ... Dulverton/

The weir was originally built for hydro:
http://www.exmoor-nationalpark.gov.uk/a ... 11.130.pdf

Also seem to be several schemes on the Dart (1st link).

Mike
http://kayakworldguide.forums-free.com Links to websites with info on white water, touring, sea & surf.
jmmoxon
 
Posts: 5088
Joined: Sat Sep 14, 2002 12:12 pm
Location: Sometimes Sunny Somerset

Re: Hydro on the Barle

Postby TonyM » Thu Jun 07, 2012 12:49 pm

Here's the artist's impression of the structure:
http://www.exmoor-nationalpark.gov.uk/P ... scheme.pdf

Planning application link here:
http://www.exmoor-nationalpark.gov.uk/p ... C+Somerset

Having looked at some of the planning application documents it seems that the intention is to abstract a substantial proportion of the flow. However this proportion will vary depending on the water level in the river.

Concerns have been raised about the flow rate into the screen possibly causing entrapment against the screen at the head of the screw. I haven’t looked in enough detail at the application to see if it has been addressed. Will this concern have to be dealt with under existing H&S / CDM legislation?
TonyM
 
Posts: 355
Joined: Wed Dec 20, 2006 12:50 am
Location: Somerset


Return to Inland

Who is online

Users browsing this forum: Aidy, Dave Thomas, hannmatt92, kayaker_13, LouC, marmot, mike bennett, neil_f, Philip Mitchell, Rinseout, steve t and 11 guests